Auto Repair Forums

Full Version: dtc p0320 p0725
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Year: 2000
Model: grand cherokee
Engine Size: 4.7 ltr
Auto/Manual: auto
Mileage: 129128

are these 2 codes related? does p0320 mean engine speed sensor or does it have to do with the crank position sensor?
i found the camshaft sensor, but i cant find the crank sensor..
It is a good possibility they are both related to the crankshaft sensor. The 320 is for no rpm signal to the PCM. This comes from the crankshaft sensor. The 728 is the transmission control module detected the rpm's has dropped below 400 while engine is running. AlldataPro shows it is located just above the starter. There should be a wiring connector just to the rear of starter solenoid wires. Good luck.
Thanks for the quick response and info on location of sensor. Ill go back and "seek" and replace it, and will let you know if all is ok.
Reference URL's