Auto Repair Forums
2004 Chev Cargo van Ignition switch - Printable Version

+- Auto Repair Forums (http://www.autowebrepair.com/forum/upload)
+-- Forum: Foreign & Domestic (/forumdisplay.php?fid=1)
+--- Forum: Chevrolet (/forumdisplay.php?fid=3)
+--- Thread: 2004 Chev Cargo van Ignition switch (/showthread.php?tid=158)



2004 Chev Cargo van Ignition switch - ofert - 03-26-2007 08:29 PM

Can anyone give me some help on replacing switch.Do i need any special tools? Thanks in advance . ofert


RE: 2004 Chev Cargo van Ignition switch - CaryJoeYork - 03-26-2007 10:25 PM

Are you replace the key/lock cyl part? Or the electical part of the ignition switch? Why are you replacing it? There is a TSB for Ignition Key and/or Ignition Lock Cylinder Does Not Turn. I can post info if I know the problem.


RE: 2004 Chev Cargo van Ignition switch - ofert - 03-27-2007 03:08 PM

CaryJoeYork Wrote:Are you replace the key/lock cyl part? Or the electical part of the ignition switch? Why are you replacing it? There is a TSB for Ignition Key and/or Ignition Lock Cylinder Does Not Turn. I can post info if I know the problem.
The ignition cylinder does not turn


RE: 2004 Chev Cargo van Ignition switch - CaryJoeYork - 03-27-2007 06:03 PM

Bulletin No.: 06-02-35-001

Date: January 05, 2006

TECHNICAL

Subject:
Ignition Key and/or Ignition Lock Cylinder Does Not Turn (Replace Ignition Key)

Models:
2003-2006 Chevrolet Express
2003-2006 GMC Savana

Condition

Some customers may comment that the ignition key and/or the ignition lock cylinder may not turn.

Cause

Bent or twisted ignition keys may cause ignition lock cylinders not to turn.

Correction

Do NOT replace ignition switch.

Replace the ignition key. Obtain blank key and cut new key for vehicle.

If the ignition lock cylinder will not turn after the key has been replaced, replace the ignition lock cylinder.