Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Driver side power window switch
06-03-2015, 05:15 PM
Post: #1
Driver side power window switch
Got a big problem with my driver side window switch its dying. Is it possible to replace with a newer model switch if the plug fits or does it have to be year specific? and do you know of any site to get one cheap? All the junk yards around here don't have any. Already called.
Find all posts by this user
Quote this message in a reply
06-03-2015, 08:55 PM
Post: #2
RE: Driver side power window switch
Well, I'm assuming it's a Hyundai? A year and model would make it easier for me to do some looking for you. Please post back.

Thanks for using the forum,
Garner

Interested in Mining? Look here: Coal Mining, PA
Visit this user's website Find all posts by this user
Quote this message in a reply
06-03-2015, 11:37 PM
Post: #3
RE: Driver side power window switch
The problem with most window switches is while the guts are similar they usually come with the exterior trim so year to year they will not fit the door panel and may not even fit in the location.

You might be amazed at what can be found on Amazon.com for way cheaper than retail in the aftermarket. I have found that if their listing isn't clear you can look at the customer reviews and see what people's experience says. I have found those to be a great help!
Find all posts by this user
Quote this message in a reply
06-04-2015, 12:37 AM
Post: #4
RE: Driver side power window switch
Also try ebay have bought many parts from them got great service assad pricing from them
Find all posts by this user
Quote this message in a reply
06-04-2015, 10:50 AM
Post: #5
RE: Driver side power window switch
It a 99 Elantra. cheapest I found was around $50. but I found an 01 for $25 and for me the cheaper the better. as long as it work is all I need I can alter a few things to make stuff fit.
Find all posts by this user
Quote this message in a reply
06-04-2015, 11:26 AM
Post: #6
RE: Driver side power window switch
If you are willing to live with a hack job you can probably get a momentary double pole switch from an electrical supply house then drill a hole somewhere. 6 wires would be a double pole, double throw switch. Momentary contact will be spring loaded with center postion being off. 3 wires will be single pole, double throw. (center off)
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)