Thread Closed 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1991 4 speed Automatic Transmission.
04-15-2007, 06:39 PM
Post: #1
1991 4 speed Automatic Transmission.
I have Installed a used transmission in a 1991 Acura Integra and have used Acura OEM Transmission fluid. The transmission shifts very smooth through all gears with no slipping.But ocationally going from park to reverse it wll grind and will not mesh into gear.
Find all posts by this user
04-16-2007, 08:12 PM
Post: #2
RE: 1991 4 speed Automatic Transmission.
ACURA/HONDA USE A NON SYC. HUB AND SLIDER FOR REV. CHANCES ARE ITS DAMAGED FROM ABUSE HIGH IDLE/ROCKING IN SNOW ETC. NO EASY FIX.
Find all posts by this user
04-16-2007, 10:24 PM
Post: #3
RE: 1991 4 speed Automatic Transmission.
tom kilgannon Wrote:ACURA/HONDA USE A NON SYC. HUB AND SLIDER FOR REV. CHANCES ARE ITS DAMAGED FROM ABUSE HIGH IDLE/ROCKING IN SNOW ETC. NO EASY FIX.
Find all posts by this user
04-16-2007, 10:31 PM
Post: #4
RE: 1991 4 speed Automatic Transmission.
Tom thanks for the information,I should have told you that it was doing the same thing going from nuetral to drive but after adjusting the shifter cable it no longer happens while going from nuetral to drive would this lead you to any other suggestions thanks.
Find all posts by this user
04-17-2007, 08:46 AM
Post: #5
RE: 1991 4 speed Automatic Transmission.
NOT REALLY BUT DOUBLE CK. IT IS A CRITICAL ADJ.
Find all posts by this user
12-03-2009, 02:18 AM
Post: #6
RE: 1991 4 speed Automatic Transmission.
Hi..
Actually i do not have any idea on it but i am interested in the cars.. So i think this is really good forum for me..

nintendo dsi r4
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)