Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C240
10-03-2011, 04:40 PM
Post: #1
C240
Hello,

Looking for some step by step instructions, on front driver side, lower control arm replacement for a Mercedes C240.
Any help would be greatly appreciated.

Thanks,

Paul
Find all posts by this user
Quote this message in a reply
10-03-2011, 07:46 PM
Post: #2
RE: C240
Not sure if I can put that into step by step instructions but basically you need to raise and properly support the vehicle then start taking things apart. Front end work is generally fairly straight forward even for a DIY type so other than marking any adjustments and having the front end aligned afterward there's not too much to say. If you have the replacement part in hand that should give you an idea of what's holding it in place.

If you want diagrams, pictures, and more details I would try http://www.autozone.com and create a free account. From there you can access their "how to" section for more specifics.

Let us know how you make out.
Find all posts by this user
Quote this message in a reply
10-05-2011, 02:38 PM
Post: #3
RE: C240
(10-03-2011 07:46 PM)Rupe Wrote:  Not sure if I can put that into step by step instructions but basically you need to raise and properly support the vehicle then start taking things apart. Front end work is generally fairly straight forward even for a DIY type so other than marking any adjustments and having the front end aligned afterward there's not too much to say. If you have the replacement part in hand that should give you an idea of what's holding it in place.

If you want diagrams, pictures, and more details I would try http://www.autozone.com and create a free account. From there you can access their "how to" section for more specifics.

Let us know how you make out.

Thank you Rupe.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)