Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Replace hub 2004 Mitsu Lancer OZ Rally
02-16-2012, 09:40 PM
Post: #1
Replace hub 2004 Mitsu Lancer OZ Rally
Well here's the situation. I bought 4 new rims and tires for my 2004 Lancer OZ Rally. I came to find out that one of the hubs is 4x100mm instead of the 4x114 which is the regular size and the size of the other three hubs. I plan on replacing the hub as they do not make 4x100s of the rim i bought. My question is what are all the parts I will need for this? Do i need a new bearing? brake drum? I hope somebody can help it would be greatly appreciated.
Find all posts by this user
Quote this message in a reply
02-16-2012, 10:39 PM
Post: #2
RE: Replace hub 2004 Mitsu Lancer OZ Rally
Most studs are pressed into the hub so you might be able to purchase just the studs and save quite a bit of money. Ask at your local parts store or dealer.

If they are not welded in place just post again and we can talk you through the process. It will require a BIG hammer, a few old "acorn style" lug nuts, and a few washers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)