Thread Closed 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
problems with 88 crown vic
03-03-2007, 02:29 AM
Post: #1
MyBB problems with 88 crown vic
I am have problems with my 88 crown vic - it is very intermittent - upon acceleration I feel a jerking vibration and it feels as if it is losing power or not shifting (aod Trans) I have had the trans rebuilt less than 13 months ago, complete tune up -- any suggestions

Mommy's Little Grease Monkey Strikes Again
Find all posts by this user
03-03-2007, 01:01 PM
Post: #2
RE: problems with 88 crown vic
I would remove the MAF (mass air flow) sensor and clean or replace it. You can try cleaning it first if you like. They make a special cleaner in a can for MAF sensor cleaning.

Cary Joe York
Support
Find all posts by this user
03-03-2007, 02:14 PM
Post: #3
RE: problems with 88 crown vic
I will add that to my list of options along with fuel filter.

Mommy's Little Grease Monkey Strikes Again
Find all posts by this user
03-03-2007, 05:38 PM
Post: #4
RE: problems with 88 crown vic
worse 3rd? ck coil spray wateron coil eng. breaks up replace /ck wires
Find all posts by this user
03-04-2007, 12:44 AM
Post: #5
RE: problems with 88 crown vic
tom kilgannon Wrote:worse 3rd? ck coil spray wateron coil eng. breaks up replace /ck wires

I have just put new high output coil, 9mm wires, new plugs etc.... this has been driving me crazy .. never had issue like this-- if I push it hard it seems not to have the problem or when it does I hammer the pedal and it comes out of its little stutter or what ever th H@#% its doing -- "Smiley" has not made me happy as of late.

Mommy's Little Grease Monkey Strikes Again
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)